People who stumble upon Microsoft Multiplexor Protocol may wonder what exactly is Microsoft Network Adapter Multiplexor Protocol. Since this feature is not available by default on the Windows system, you could be asking yourself if I should use Microsoft Network Adapter Multiplexor Protocol and how I can enable it. If you’re a novice in the field of networking and want the answers to this question You’ve come to the right place If you’re looking to understand something technical about the same subject, continue studying.
What is it? Microsoft Network Adapter Multiplexor Protocol?
Microsoft Adapter Multiplexor Protocol is a built-in configuration of Windows which is enabled when a PC is linked to multiple networks (i.e. multiple network adapters) or a connection. The reason behind this setting is to improve the performance of your network connection and boost the bandwidth (bandwidth is the amount of data sent through a connection at a given time e.g. Mbps). Technically speaking it’s an kernel-mode driver (a driver that communicates between hardware and software in the system) that is used to perform NIC grouping (Network Interface Bonding). It is possible to ask again what you mean by Network Interface Bonding means. It’s an abstract term used to describe connecting multiple network adapters in parallel, which improves efficiency of the networks. One of the biggest advantages of this technique is that should there be a a network malfunction of one adapter, the network is routed to a different adapter, ensuring it is in a state of continuous network and therefore more tolerance to faults.
Do I need Microsoft Network Adapter Multiplexor Protocol?
You may have gained an understanding of the fundamentals of the network’s technical aspects as well as the Microsoft Multiplexor Protocol. This means that Microsoft Adapter Multiplexor Protocol will be automatically enabled by the system based on how many adapters are that are connected. Therefore, if you are using one router, or there is only one adapter that is connected, you don’t have to turn on this option because it won’t aid in the optimization of your network. If your device is connected to multiple connections and you want to optimize that connection, you should turn it on. Microsoft Adapter Multiplexor Protocol is an excellent driver, which effectively leads us to the next topic.
How to enable Microsoft Network Adapter Multiplexor Protocol
Before we look at the steps to activate Microsoft Adapter Multiplexor Protocol, we will examine what happens when we attempt to enable the option only when we possess one adapter for our network.
1. Click on the Windows key, type Control Panel and then click “Open”.
2. Create View by Category Then, click the Network and Internet option.
3. Click on Network & Sharing Center.
4. Click on the Ethernet choice within the Connections section.
5. Click on Properties.
6. Under the Networking tab In the Networking tab, you will find Microsoft Network Adapter Multiplexor Protocol tick box.
7. If you attempt to check the box and then click OK, you will be greeted with this error.
8. If you do click the Yes button, it will not be ticked. This is because if you have just one network adapter installed, it’s not possible to activate this option therefore turning it on manually isn’t recommended.
In the event that you are connected to more than one router or adapter the system will be able to detect it and start an automatic installation of the Microsoft Network Adapter Multiplexor Protocol driver. It will automatically select the option above to allow Network Interface Bonding to be enabled.
Frequently asked questions (FAQs)
Q1. Do you think it require that the Microsoft Network Multiplexor Protocol need to be manually turned on?
No This setting isn’t designed to be activated manually when only one adapter connects. If two network adapters being connected, it is likely that the Microsoft Network Multiplexor Protocol is automatically enabled, and there is no need to be concerned about it.
Q2. What is the reason for the Multiplexor driver to be needed to support multiple adapters? What can they do?
When two adapters are connected, the Microsoft Network Multiplexor Protocol driver is activated which allows for optimization of network. This could bring advantages such as increased bandwidth and failure tolerance (if the network in question fails, another network is activated to continue the flow of network) and so on.
Q3. What exactly is NIC Teaming?
Network Interface Card Teaming is a strategy for grouping parallel network adapters to increase the performance of a network including its bandwidth as well as the degree of fault tolerance.
